Canon ImageRunner iR8500 Series Service Manual page 952

Chapter 17
<PART-CHK>
Sub-item
CL
CL-ON
MTR
MTR-ON
SL
SL-ON
Code
1
2
3
4
5
6
7
8
9
10
11
17-108
Key
Start
Clear
PIN
Help
Counter Check
COPIER > FUNCTION > PART-CHK
Specifying a clutch to check its operation
(Range: 1 to 21)
<Operating procedure>
1) Select this item.
2) Enter the code of the clutch from the ten-key pad.
3) Press the OK key.
4) Press CL-ON to check its operation.
Starting the clutch operation check
<Operating procedure>
1) Select this item and press the OK key to repeat ON and OFF in the following
pattern:
0.5-second ON ->10-second OFF -> 0.5-second ON -> 10-second OFF -> 0.5-
second ON -> OFF
Specifying a motor to check its operation
(Range: 1 to 11)
<Operating procedure>
1) Select this item.
2) Enter the code of the motor from the ten-key pad.
3) Press the OK key.
4) Press MTR-ON to check its operation.
Starting the motor operation check
<Operating procedure>
1) Select the item, and press the OK key.
- 20 sec ON -> OFF
- for hopper and duplex horizontal registration motor, 10 sec ON -> OFF
- for shift tray motor, stops at front/rear HP
Specifying a solenoid to check its operation
(Range: 1 to 13)
<Operating procedure>
1) Select this item.
2) Enter the code of the solenoid from the ten-key pad.
3) Press the OK key.
4) Press SOL-ON to check its operation.
Starting the solenoid operation check
<Operating procedure>
1) Select this item and press the OK key to repeat ON and OFF in the following
pattern:
0.5-second ON -> 5-second OFF -> 0.5-second ON -> 5-second OFF -> 0.5-
second ON -> OFF
Name
manual feed tray pickup clutch (CL7)
cassette 3 pickup clutch (CL12)
vertical path 3 clutch (CL13)
cassette 4 pickup clutch (CL14)
vertical path 4 clutch (CL15)
deck (right) pickup clutch (CL10)
vertical path 1 clutch (CL8)
deck (left) pickup clutch (CL11)
vertical path 2 clutch (CL9)
pre-registration clutch (CL5)
lower feeder middle cutch (CL6)
Screen Display
START
CLEAR
ID
?
BILL
T-17-130
Description
T-17-131
Code Name
12 lower feeder right clutch (CL17)
13 deck (left) feed clutch (CL19)
14 delivery speed switch-over clutch (CL21)
15 registration brake clutch (CL3)
16 manual feed tray feed clutch (CL18)
17 inside hopper magnet roller drive clutch (CL1)
18 developing sleeve clutch (CL4)
19 registration clutch (CL2)
20 side paper deck feed clutch (CL101)
21 side paper deck pickup clutch (CL102)
Level
1
1
1
1
1
1