Counters; Soft Counters - Canon ImageRunner iR8500 Series Service Manual

11.2 Counters

11.2.1 Soft Counters

iR105i/iR105+ / iR9070 / iR8070
The machine is equipped with soft counters to keep count of prints it makes. The counter readings are checked by pressing the Check key in the control
panel.
The counters are controlled by the main controller PCB, and the readings are incremented when the following sensors detect paper during copying or
printing.
Copying/printing operation
Single-sided
Double-sided
The counter mechanism consists of 16 items for large-size and small-size sheet, each with 8 mode items.
Copying/printing mode
Load copy
PDL print
Box print
Remote copy print
FAX reception print*2
Report print
Double-sided print
Scan
*1: At time of shipment from the factory, B4 or smaller; to count B4 as large-size, use service mode.
*2: Not counted; the machine is not equipped with fax functions.
The counters are set as follows when the machine is shipped from the factory to suit its country of installation:
- 100V/200V
Counter
Counter 1
Counter 2
Counter 3
Counter 4
Counter 5
Counter 6
-208V, 230V (other than Europe)
Counter
Counter 1
Counter 2
Counter 3
Counter 4
Counter 5
Counter 6
Counter sensor
Finisher delivery sensor
1st side:
2nd side:
Large-size
A
C
E
G
I
K
M
O
Description *1
Total (A through L)
-
-
-
-
-
Description *1
Total (A through L)
Total large (ACEGIK)
Copy 1 (ABGH)
Copy 1 large (AG)
-
-
T-11-3
PS14
finisher delivery sensor
T-11-4
Small-size *1
B
D
F
H
J
L
N
P
T-11-5
Default change *2
Default
ON Fixed
OFF May be changed
OFF May be changed
OFF May be changed
OFF May be changed
OFF May be changed
T-11-6
Default Default change *2
ON Fixed
ON May be changed
ON May be changed
ON May be changed
OFF May be changed
OFF May be changed
Chapter 11
0006-9806
11-3