Canon ImageRunner iR8500 Series Service Manual page 89

Fixing method
Counter
Toner type
Original type
Maximum original size
Reproduction ratio
Fine adjustment of
reproduction ratio
Warm-up time
First print time
Continuous reproduction
Print area
Reading speed
Printing speed
Reading resolution
Copying resolution
Printing resolution
Gradation
Paper deck capacity
Cassette capacity
Hard disk
Non-image width (leading
edge)
Non-image width (trailing
edge)
Non-image width (left/right) Direct/R-E: 2.5 -/+1.5 mm (when an ADF is used: 2.5 -/+1.8
Image margin (leading edge) Direct/R-E: 4.0 + 1.5/-1.0 mm (when an ADF is used: 4.0 -/
Image margin (trailing edge) Direct/R-E: (one-sided) 2.5 -/+1.5 mm (when an ADF is used:
Image margin (left/right)
Auto Clear
Auto power off
Low-power mode
Sleep mode
Energy save mode
Option
Operating environment
(temperature range)
Operating environment
(humidity range)
Heat roller 100 V: 800 W (main) + 250 W (sub) 208 V: 900 W
(main) + 600 W (sub) 230 V: 900 W (main) + 600 W (sub)
Soft counter
Magnetic, positive toner (toner cartridge)
Sheet, book, 3-D object (2 kg max.)
A3/279.4 x 431.8 mm (11 x 17)
Direct 1:1 Reduce I 1:0.250 Reduce II 1:0.500 Reduce III
1:0.611 Reduce IV 1:0.707 Reduce V 1:0.816 Reduce VI
1:0.865 Enlarge I 1:1.154 Enlarge II 1:1.224 Enlarge III 1:1.414
Enlarge IV 1:2.000 Enlarge V 1:4.000 Zoom: 1:0.250 to 4.000
(25 % to 400 % in 1 % increments)
Set ratio in user mode when setting 100 %
6 min or less (at 20 deg C room temperature, rated input)
4.3 sec or less : (stream reading, right deck pick up selected
manually, Direct, A4/LTR, non-AE, straight delivery, xenon
lamp pre-activation ON) 3.1 sec or less : (book mode, right deck
pickup selected manually, 1 original, Direct, A4/LTR, non-AE,
straight delivery, xenon lamp pre-activation ON)
1 to 9999 pages
Single-sided AB: A3 max., postcard (vertical feed) min. Inch:
279.4 x 431.8 mm (11 x 17) max., STMT (vertical feed) min.
Double-sided AB: A3 max., A5 (vertical feed) min.
279.4 x 431.8 mm (11 x 17) max., STMT (vertical feed) min.
450 mm/s
450 mm/s
600 x 600 dpi
1200 (equivalent) x 600 dpi
2400 (equivalent) x 600 dpi
TBIC method, binary
162 mm deep approx. (about 1500 sheets of 80 g/m2 paper)
55 mm deep approx. (about 550 sheets of 80 g/m2 paper)
20 GB
Direct/R-E: 4.0 + 1.5/-1.0 mm (when an ADF is used: 4.0 -/+1.8
mm/-1.4 mm)
Direct/R-E: 2.5 -/+1.5 mm (when an ADF is used: 2.5 -/+1.8
mm)
mm)
+1.5/-1.0 mm)
2.5 -/+1.5 mm) Direct/R-E: (two-sided) 2.5 -/+2.0 mm (when
an ADF is used: 2.5 -/+2.0 mm)
Direct/R-E: 2.5 + 1.5 mm (when an ADF is used: 2.5 -/+1.5
mm) (on left, 0.5 mm or more)
Yes (2 min standard; may be changed between 0 and 9 min in
1-min increments)
No
Yes (15 min standard; may be changed in user mode: 10, 15, 20,
30, 40, 50, 60, 90 min; 2, 3, 4 hr)
Yes (60 min standard; may be changed in user mode: 10, 15, 20,
30, 40, 50, 60, 90 min; 2, 3, 4 hr)
Yes (-10 % standard; may be changed in user mode: -10 %, -25
%, -50 %, 0 % no recovery time)
See "System configuration".
See "Selecting the site".
See "Selecting the site".
Chapter 1
Inch:
1-53