Canon ImageRunner iR8500 Series Service Manual page 1018

Chapter 17
MB-CCV
PR-D-SEL
TRY-STP
MF-LG-ST
CNT-DISP
INS-C/S
TBIC-RNK
HDCR-DSP
JOB-INVL
LGSW-DSP
PCL-COPY
PRJOB-CP
DPT-ID-7
RUI-RJT
CTM-S06
17-174
Sub-item
Limiting the mailbox control card user
<Setting value>
0: No
1: Yes [Default]
Use it to set the density of printing (PDL input).
<Setting value>
0 to 8 (4: default)
0 (light) <=> 4 (standard) <=> 8 (dark)
Setting output or no output in the tray full state
<Setting value>
0: Ordinary mode (Interrupt when the finisher tray is full) [Default]
1: Interrupt by height detection only
Setting the long mode key
<Setting value>
0: Ordinary [Default]
1: Display a long mode key on the corresponding mode screen
Setting whether or not to display a serial number when the counter confirmation
key is pressed
<Setting value>
0: Display a serial number [Default]
1: Do not display a serial number
Use it to expand the inserter function.
<Setting value>
0: support cover only (default)
1: support cover + interleaf (multi inserter)
Use it to reduce uneven intervals.
<Setting value>
1 to 5 (default: 1)
Setting whether or not display HDD clearance in User mode and changing the
contents of clearance
<Setting value>
1: Clear once with 0 [Default]
2: Clear once with random data
3: Clear three times with random data
Setting the job interval at interrupt
<Setting value>
0: Output the next job continuously in interrupt copying (Standard) [Default]
1: Start outputting the next job after the last paper of the interrupted copy job is
output
2: Start outputting the next job after the last paper of all jobs is output
Setting whether or not to display [Log display ON/OFF] on the User mode
screen
[Default]
0: Do not display [Log display ON/OFF] [Default]
1: Display [Log display ON/OFF]
Supporting the PCL command [COPIES Meru/Pinatubo/Hood]
<Setting value>
0: Control each page according to the command of the COPIES command
specified to the page [Default]
1: Meru/Pinatubo/Hood compatible mode
2 to 65535: Reserved
Setting the CCV count pulse at reception and report output
<Setting value>
0: Do not output count pulse [Default]
1: Output count pulse
Registering the department ID and entering 7 digits for authentication
<Setting value>
0: Conventional [Default]
1: 7-digit input
Disconnecting the HTTP port from RUI by three authentication failures
<Setting value>
0: Invalid [Default]
1: Valid
Setting whether or not to erase the password from the export file of the file send
address
<Setting value>
0: Do not erase the password from the export file. [Default]
1: Erase the password from the export file.
COPIER > OPTION >USER
Description Level
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2