Unpacking - Canon ImageRunner iR8500 Series Service Manual

Chapter 2

2.2.5 Unpacking

1) Unpack the copier.
Open the plastic bag.
Insert a flat-blade screwdriver into the top of the grip cover [1] (2 pc.)
on the left side of the machine, and detach the cover.
Shift up the grips [2].
[2]
[1]
2) Detach the grip cover [1] on the right side of the machine (using a flat-
blade screwdriver), and shift up the grip [2] at the rear.
3) Take out the grip [1] from the box that comes with the machine.
[1]
4) Open the right upper cover, and slide the small face cover [1] to the
rear to detach; then, detach the large face cover [2].
Fit the grip [3] detached in step 3 at the front.
Close the right upper cover.
2-20
0007-2893
[2]
F-2-55
[2]
[1]
F-2-56
F-2-57
5) Holding the grips on the pickup side (front, rear) for the copier, lift
the machine slightly to remove the pad [1].
At this time, move the plastic bag [2] toward the remaining pad.
[2]
6) Holding the grips on the delivery side (front, rear) of the copier, lift
the machine slightly to remove the remaining pad [1] and the plastic
bag at the same time.
7) Shift up the 2 adjusters [1] (front) found on the bottom for the copier,
and check that they are unlocked.
[1]
[3]
[2]
F-2-58
[1]
F-2-59
[1]
F-2-60