Chapter 15
15.1.7 Checking the Paper
iR105i/iR105+ / iR9070 / iR85+ / iR8070
a. Check to see if the paper is a type recommended by Canon.
b. Check to see if the paper is moist. Try paper fresh out of package.
15.1.8 Checking the Periodically Replaced Parts
iR105i/iR105+ / iR9070 / iR85+ / iR8070
Check with the Periodical Servicing Chart and the Periodically Replaced Parts Table, and replace those parts that have reached the end of their lives.
15.1.9 Others
iR105i/iR105+ / iR9070 / iR8070
In winter, bringing a machine from a cold to warm place can cause the inside of the machine to develop condensation, leading to various problems.
MEMO:
a. Condensation in the scanning system (glass, mirrors, lenses) will produce darker images.
b. Condensation in the charging system will cause electrical leakage.
c. Condensation on the pickup/feeding guide will cause feeding faults.
If condensation is found, dry wipe the part or leave the machine alone and powered for 60 min.
If the density is uneven (different between front and rear) or the image is too light or is foggy, perform the "Image Adjustment Basic Procedure" in advance.
15.1.10 Others
iR85+
In winter, bringing a machine from a cold to warm place can cause the inside of the machine to develop condensation, leading to various problems.
MEMO:
a. Condensation in the charging system will cause electrical leakage.
b. Condensation on the pickup/feeding guide will cause feeding faults.
If condensation is found, dry wipe the part or leave the machine alone and powered for 60 min.
If the density is uneven (different between front and rear) or the image is too light or is foggy, perform the "Image Adjustment Basic Procedure" in advance.
15-2
0007-0821
0007-0822
0007-0823
0008-9134