Mounting The Fixing Cleaning Belt - Canon ImageRunner iR8500 Series Service Manual

Chapter 10
4) Remove the two screws [3] used to secure the fixing cleaning belt
assembly, and open the top of the fixing cleaning belt assembly
upward.
[3]
5) While pushing the cleaning belt feeding roller [4] and the take-up
roller [5] toward the rear, detach the cleaning belt [6].
[5]
10-32
[1] [2]
F-10-90
[3]
F-10-91
[6]
[4]
F-10-92
When cleaning the silicone oil pan, be sure to remove the silicone oil
collecting in the oil pan [7] found under the cleaning belt feeding roller.

10.5.10.2 Mounting the Fixing Cleaning Belt

iR105i/iR105+ / iR9070 / iR85+ / iR8070
Mount the fixing cleaning belt by reversing the steps used to remove it.
1) Wind the cleaning belt [2] around the cleaning belt take-up roller [1]
two to three times, and mount it so that the arm guide plate [3] at the
front is on the outside of the take-up roller.
At this time, check to make sure that the area of contact with the roller
is impregnated with oil.
[3]
Check the fixing cleaning belt for skew, wrapping, and wrinkling.
Further, be sure that the winding direction and the mounting orientation
are as indicated.
[7]
F-10-93
0007-1475
[1]
[2]
F-10-94