Developing Fan; Removing The Developing Fan (Fm15) - Canon ImageRunner iR8500 Series Service Manual

[2]
[1]
[3]
11.5.38.2 Removing the Separation Fan (FM13)
/ iR85+ / iR8070
1) Slide out the fixing/feeder unit.
2) Remove the 4 screws [1], and detach the fixing/feeding lower cover
(1) [2] and the fixing/feeding lower cover (2) [3].
[1]
[2]
3) Disconnect the connector [1], and remove the five screws [2]; then,
detach the separation fan unit [3].
[3]
[2]
[2]
[1]
4) Remove the three screws [1], and detach the separation fan [2].
[2]
F-11-158
0008-8265
[1] [3]
[1]
F-11-159
[2]
F-11-160
[1]
[2]

11.5.39 Developing Fan

11.5.39.1 Removing the Developing Fan (FM15)

iR105i/iR105+ / iR9070
1) Remove the primary charging assembly.
2) Disconnect the connector [1], and remove the 2 screws [2]; then,
detach the fan unit [3].
[2]
3) Remove the 2 screws [1], and detach the developing assembly fan [2].
[1]
[2]
[1]
When mounting the fan, be sure that the direction of air current is as
indicated by the arrow.
Chapter 11
F-11-161
0007-3064
[3]
[1]
F-11-162
F-11-163
11-49