Replacing The Drum Cartridge - Canon imageCLASS MF8180C Starter Manual

Replacing the Drum Cartridge

Drum cartridges are consumable products. Replace the drum cartridge with a new one when <PREPARE
NEW DRUM> or <REPLACE THE DRUM> appears in the LCD.
Replacing the Drum Cartridge
1
Lift the scanning platform and open the
cartridge cover.
2
Remove the drum cartridge from the machine.
Pull up the green handle on the drum cartridge in the
direction of the arrow.
Lift the cartridge straight up.
3
Use a soft, dry cloth and wipe off chipped paper
and toner that are attached on the transparent
sheet located at the front of the roller.
55
4
Take the drum cartridge out of the protective
bag.
Open the protective bag with scissors, so as not to
damage the cartridge.
5
Remove the packing materials (7 pieces).
Remove the packing materials (A) and (B) by hooking
your fingers into the tab and pulling them in the direction
of the arrows.
B
A
Remove the packing materials (C) and (D) by turning
them in the direction of the arrows until they stop and
pulling them away.
D
C
Remove the packing materials (E) and (F) by holding the
grips and pulling them in the direction of the arrows.
F
E
Hold the packing material (G) and remove it as shown in
the figure.
G
NOTE
• Do not hold or touch the electrical contacts (A). It may
result in damage to the machine.
A
A
• Do not hold or touch the imaging transfer belt (A). The
image quality may deteriorate. Do not apply shock to
the drum cartridge memory (B) or bring it near
magnetic waves. It may result in damage to the
machine.
B
A
6
Hold the drum cartridge with both hands and
install it in the machine.
Position the triangular mark on the drum cartridge with
the triangular mark on the machine and install the drum
cartridge
Lock the drum cartridge by pushing it down toward you.
7
Close the cartridge cover and lower the
scanning platform.
56