Canon ImageRunner iR8500 Series Service Manual page 1038

Chapter 17
RUI-RJT
CTM-S06
FREG-SW
IFAX-SZL
IFAX-PGD
MEAPSAFE
TRAY-FLL
PRNT-POS
AFN-PSWD
PTJAM-RC
SLP-SLCT
PS-MODE
CNCT-RLZ
Software counter specifications
100 - 199: Total
200 - 299: Copy (001 to 099 added in case of shortage)
300 - 399: Print
400 - 499: Copy and print
500 - 599: Scan
600 - 699: Box print
700 - 799: Receive print
17-194
Sub-item
Disconnecting the HTTP port from RUI by three authentication failures
<Setting value>
0: Invalid [Default]
1: Valid
Setting whether or not to erase the password from the export file of the file send
address
<Setting value>
0: Do not erase the password from the export file. [Default]
1: Erase the password from the export file.
Setting whether or not to display the free section of the MEAP counter (SEND)
<Setting value>
0: Do not display [Default]
1: Display
Enabling or disabling the send size limit in IFAX transmission (not via server
only)
<Setting value>
0: Send size limit enabled (via server/not via server)
1: Send size limit disabled (not via server only) [Default]
Setting whether or not to permit split send in pages (only beyond the upper limit
of the send data size)
<Setting value>
0: Do not permit split send in IFAX Simple mode transmission [Default]
1: Permit split send in IFAX Simple mode transmission
Turning the MEAP Safe mode ON or OFF
<Setting value>
0: OFF [Default]
1: ON (Safe mode)
Use it to enable or disable notification in response to the tray becoming full.
0: indicate that the output tray has become full when all available trays have
become full
1: indicate that the output tray has become full only when the special tray (if
selected) has become full or all trays have been identified as being full
Use it to specify whether to stop or not to stop all subsequent jobs when a job is
canceled in the event of an error.
<Setting value>
0: do not stop all
1: stop all
Limiting access in User mode
<Setting value>
0: OFF (Transition to the User mode screen with no password request) [Default]
1: ON (Transition to the User mode screen after password matching)
Turning PDL jam recovery ON or OFF
<Setting value>
0: OFF (Do not recover)
1: ON (Recover) [Default]
Switch of the existing network application
<Setting value>
0: Not use [Default]
1: Use
When the machine is set its range as "1", it will not move to the sleep mode
3.
Setting PS internal mode
<Setting value>
0 to 65535
0: Not compatible [Default]
1: PS Type 3 Halftone command compatible (conventional) (Dither growth
forward and reverse)
2 to 65535: Reserved
Use it to specify whether to use or not to use the connection serialization function.
<Setting value>
0: OFF (disable connection serialization function)
1: ON (enlarge connection serialization function)
COPIER > OPTION >USER
Description Level
2
2
2
2
2
2
2
2
2
2
2
2
2