Power Supply Cooling Fan 2; Separation Fan; Removing The Separation Fan (Fm13) - Canon ImageRunner iR8500 Series Service Manual

Chapter 11
[2]
[3]
[1]
When mounting the fan, be sure that the direction of air current is as
indicated by the arrow.

11.5.37 Power Supply Cooling Fan 2

11.5.37.1 Removing the Power Supply Cooling Fan 2
(FM12)
iR105i/iR105+ / iR9070
1) Remove the fan mounting base.
2) Remove the 2 screws [1], and disconnect the connector [2]; then,
detach the power supply cooling fan 2 [3].
[1] [3] [2]
When mounting the fan, be sure that the direction of air current is as
indicated by the arrow.
11.5.37.2 Removing the Power Supply Cooling Fan 2
(FM12)
/ iR85+ / iR8070
1) Slide out the fixing/feeder unit.
11-48
[1]
F-11-154
0007-3059
[1]
F-11-155
0008-8264
2) Remove the 4 screws [1], and detach the fixing/feeding lower cover
(1) [2] and the fixing/feeding lower cover (2) [3].
[1] [3] [2]
When mounting the fan, be sure that the direction of air current is as
indicated by the arrow.

11.5.38 Separation Fan

11.5.38.1 Removing the Separation Fan (FM13)

iR105i/iR105+ / iR9070
1) Slide out the fixing/feeder unit.
2) Remove the 4 screws [1], and detach the fixing/feeding lower cover
(1) [2] and the fixing/feeding lower cover (2) [3].
[1]
[2]
3) Disconnect the connector [1], and remove the heater 3 screws [2];
then, detach the separation fan [3].
[1]
F-11-156
0007-3060
[1] [3]
[1]
F-11-157