Chapter 17
Sub-item
STRD-S
STRD-L
RVM-SPD
17.4.2.2 Feeder List
/ iR8070
FEEDER >ADJUST
Sub-item
17-90
FEEDER >ADJUST
Use it to adjust the scanner stop position for stream reading mode (smallsize).
Make image position changed on the sheet
<Setting range> -25 to 25 (unit: 0.1 mm)
Stream reading scanner stop
position
Lower value
Higher value
If the set figure is big, the image will shift to the right.
If the set figure is small, the image will shift to the left.
Use it to adjust the scanner stop position for stream reading mode (largesize).
<Setting range> -25 to 25 (unit: 0.1 mm)
<Using the Mode>
Same as in FEEDER> ADJUST> STRD-S.
Use it to adjust the speed of the reversal motor.
MEMO:
A higher value increases the speed.
<Setting range> -30 to 30 (unit: 0.1%)
FEEDER >ADJUST
Description
Copyboard glass
T-17-97
Description
Level
1
1
1
0008-7959
Level