Service Mode Screen Configuration - Canon ImageRunner iR8500 Series Service Manual

Chapter 17
The copier has the 7 service modes listed below.

17.1.3 Service mode screen configuration

iR85+
As shown below, the service modes use three screen levels: initial screen -> main/intermediate item screen -> sub-item screen.
One set of modes are used for normal maintenance (Level 1 modes), and another set are used for troubleshooting (Level 2 modes).
17-2
User screen
( )(2,8)( )
Reset key
Initial screen
(Level 1)
(Select an item.)
Main/intermediate
item screen
(Level 1)
(Select a main item from the top of screen.)
(The corresponding intermediate items are
then displayed and can be selected.)
Sub-item screen Sub-item screen
(Level 1) (Level 1)
Previous/next page
COPIER
FEEDER
SORTER
BOARD
Initial screen
( )(2) (Level 2)
(Select an item.)
Main/intermediate
item screen
(Level 2)
Sub-item screen
(Level 2)
F-17-3
DISPLAY Status display mode
I/O I/O display mode
ADJUST Adjustment mode
FUNCTION Operation/inspection mode
Specifications setting mode
OPTION
TEST Test print mode
COUNTER Counter mode
F-17-4
(Select a main item from the top of screen.)
(The corresponding intermediate items are
then displayed and can be selected.)
Sub-item screen
(Level 2)
Previous/next page
0009-1479