Removing The Inverter Pcb - Canon ImageRunner iR8500 Series Service Manual

Chapter 5
[1]
[2]
A
5) Free the left and right hooks [2] (1 pc. each) on the mounting plate of
the inverter unit [1], and detach them upward.
[1]
[2]
View from A
6) Remove the 6 screws [1], and detach the inverter PCB [2].
[1]
[1]

5.4.6.2 Removing the Inverter PCB

1) Remove the rear cover
2) Remove the rear upper cover (2 screws)
3) Remove the inverter cooling fan duct.
4) Remove the 2 screws [1], and disconnect the 7 connectors [2].
5-38
[2] [2]
[2] [1]
F-5-97
F-5-98
[1]
[2] [1]
F-5-99
0008-8010
[1]
[2]
A
5) Free the left and right hooks [2] (1 pc. each) on the mounting plate of
the inverter unit [1], and detach them upward.
[1]
[2]
6) Remove the 6 screws [1], and detach the inverter PCB [2].
[1]
[1]
5.4.6.3 Removing the Inverter PCB
/ iR8070
1) Remove the reader controller PCB.
2) Remove the three screws [1], and detach the blanking plate [2].
[2] [2]
[2] [1]
F-5-100
View from A
F-5-101
[1]
[2] [1]
F-5-102
0008-8072