Duplexing Unit; Removing The Duplexing Unit - Canon ImageRunner iR8500 Series Service Manual

Chapter 9
[3]
4) Remove the two screws [4], and detach the fixing feeding unit
releasing lever support plate [5].
[4]
5) Remove the E-ring [6], bearing [7], and three screws [8].
6) Remove the E-ring [9], gear [10], pin [11], three screws [12], E-ring
[13], and bearing [14].
9-72
[1]
[2]
[1]
F-9-167
[5]
[4]
F-9-168
[8]
[7]
[6]
F-9-169
[12]
7) Remove the feeding belt unit [15], and detach the feeding belt [16]
and the postcard belt [17].
[17]
[16]
[15]

9.10.20 Duplexing Unit

9.10.20.1 Removing the Duplexing Unit

iR105i/iR105+ / iR9070 / iR85+ / iR8070
1) Slide out the duplexing unit from the main body.
2) Holding the left and right grips of the duplexing unit, detach it from
the main body.

Duplexing unit

Grip
[13]
[14]
[11]
[9]
[10]
F-9-170
[16]
F-9-171
0007-1411
Grip
F-9-172