Error Code List - Canon ImageRunner iR8500 Series Service Manual

Code
E733
E740
E744
E745
E746
E748
E800
E804
E805
E820
E823
E830

16.1.4 Error Code List

/ iR8070
Code
E000
E001
E002
E003
E004
E005
E010
E012
E013
E014
E015
E019
E020
E025
E032
E043
E051
E065
E067
E068
E069
E100
E110
E111
E121
E202
E204
E220
E225
E240
E243
E248
E302
E315
E320
E412
E420
E421
E422
Description
There is an error in the communication with the printer.
There is an error on the Ethernet board.
There is an error in the language file/boot ROM.
There is a fault on the TokenRing board.
The accessories board is of the wrong type.
Mismatch in controller board and SDRAM size
There is an error in the auto power-off circuit.
There is an error in the system fan/the power supply cooling fan (1 and 2).
The rotation of the fixing assembly heat discharging fan and separation heat discharging fan is faulty.
The rotation of the drum fan is faulty.
The rotation of the pre-transfer charging assembly fan is faulty.
The rotation of the separation fan is faulty.
Description
The temperature of the fixing assembly is abnormally high.
The over-rising in temperature of the fixing assembly is detected.
The rise in temperature of the fixing assembly is faulty.
The fixing temperature is too low after a standby state.
The fixing assembly is faulty.
The absence of the fixing web is detected.
The rotation of the main motor is faulty.
The rotation of the drum motor is faulty.
The lock of the waste toner feed screw is detected.
The rotation of the fixing motor is faulty.
The rotation of the pickup motor is faulty.
The waste toner case is full, or the waste toner case full sensor is faulty.
The difficulty providing toner inside the hopper developing assemblies is detected.
The toner feed motor inside the hopper is faulty.
The counter of the copy data controller or the NE controller is faulty.
The rotation of the side paper deck main motor is faulty.
There is an error in the detection of the horizontal registration home position.
There is an error in the high-voltage output to the primary charging assembly.
There is an error in the high-voltage output.
There is an error in the high-voltage output to the separation charging assembly.
There is an error in the high-voltage output to the transfer charging assembly.
The BD PCB is faulty.
The rotation of the laser scanner motor is faulty.
The rotation of the laser motor cooling fan is faulty.
The rotation of the laser cooling fan (1/2) is faulty.
There is an error in the detection of the scanner home position.
There is an error in the detection of the image leading edge signal.
The lamp inverter PCB is faulty.
The scanning lamp is faulty.
The communication between the MCON and DCON is faulty.
The communication between the control panel PCB and MCON is faulty.
Backup (EEPROM) error
Shading error
There is an error in image data.
The reader controller PCB is faulty. The main controller PCB is faulty.
There is a time out error in the image reading processing.
The rotation of the ADF cooling fan is faulty.
The EEPROM is faulty. The ADF controller PCB is faulty.
Backup (EEPROM) error
There is an error in the IPC communication.
T-16-2
Chapter 16
0008-8489
16-3