Canon ImageRunner iR8500 Series Service Manual page 857

LANG-TK
<ACC-STS>
FEEDER
SORTER
DECK
CARD
DATA-CON
RAM
NIB
PS/PCL
RIP1
NETWARE
SEND
TRIM-CN
PDL-FNC1/2
HDD
PCI1/2/3
<ANALOG>
Sub-item
TEMP
HUM
ABS-HUM
OPTICS
FIX-C
FIX-E
<CST-STS>
COPIER > DISPLAY > VERSION
Sub-item
Version of the Turkish language file
COPIER > DISPLAY > ACC-STS
Sub-item
DADF connection status
0: Not connected 1: Connected
Finisher and punch unit connection status
Sorter type 0: None 1: Finisher 2: Saddle finisher
Punch type 0: None 1: 2 holes 2: 2/3 holes 3: 4 holes (fr) 4: 4 holes (sw)
Paper deck connection status
0: not connected
1: connected (small)
2: connected (large)
Card reader connection status
0: Card reader connected with no card inserted
1: Card reader not connected or connected with card inserted
(1: Ready to copy, 0: Not ready to copy)
Copy data controller connection status
0: Not connected 1: Connected
Capacity of the memory on the main controller circuit board 256 MB, 512 MB
Network board connection status
0: No board connected
1: Ethernet board connected
2: Token ring board connected
3: Ethernet board and token ring board connected
Not used
Not used
Netware firmware installation status
0: Not installed 1: Installed
Send function addition status
0: Send function not added 1: Send function added
Display the connection status of trimmer
Setting range
0: Not connect
1: Connect
Valid PDL
0000 0000 0000 0000 to 1111 1111 1111 1111 (0:OFF,1:ON)
b31 to b16 for PDL-FNC1
b15 to b0 for PDL-FNC2
b31: BDL, b30: PS, b29: PCL, b28: PDF, b27: LIPS, b26: N201, b25: I5577, b24:
ESC/P, b23: HPGL, b22: HPGL2, b21: IMAGING, b20: KS, b19 to b0: Reserved
Model name of the hard disk drive
PCI1/2/3 board name
Not connected: Hyphen (-) displayed
Connected: Board name displayed
COPIER > DISPLAY > ANALOG
In-machine temperature (environment sensor): Unit: deg C
In-machine humidity (environment sensor): Unit: %RH
Water content (environment sensor): Unit: g
Photoconductor drum ambient temperature (drum sensor): Unit: deg C
Fixing heater temperature (main thermistor): Unit: deg C
Fixing heater edge temperature (sub-thermistor): Unit: deg C
Description
T-17-2
Description
T-17-3
Description
Chapter 17
Level
2
Level
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Level
1
1
1
1
1
1
17-13