Report Settings; Adjustment/Cleaning - Canon ImageRunner iR8500 Series Service Manual

Chapter 1
MEMO:
The items associated with the printer are indicated when the printer functions are installed.
Main item
Zoom Fine Adjustment
Saddle Stitcher Staple Repositioning Press [Start]
Saddle Stitch Position Adjustment
Double Staple Space Adjustment
Exposure Recalibration
Trim Width Adjustment
Page Num./Copy/Watermark
Position Adjust.
Feeder Cleaning
Wire Cleaning
*: Factory default.

1.2.4.6 Adjustment/Cleaning

iR85+
MEMO:
The items associated with the printer are indicated when the printer functions are installed.
Main item
Saddle Stitcher Staple Repositioning Press [Start]
Saddle Stitch Position Adjustment
Double Staple Space Adjustment
Trim Width Adjustment
Page Num./Copy/Watermark
Position Adjust.
Wire Cleaning
*: Factory default.

1.2.4.7 Report Settings

iR105i/iR105+ / iR9070 / iR8070
Main item
Settings
Print List
1-36
T-1-22
Intermediate item
X/Y: 0*, -1.0% to +1.0% in 0.1% increments
-2.0 mm to +2.0 mm (0 mm*) in 0.25 mm increments
2-3/4" to 5-7/8" (70 mm to 150 mm), 4-3/4"* (120 mm)
Copy/Send: 9 steps, 5*
11" x 17": -0.13 inch to +0.40 inch in 0.01 inch increments, 0 inch*
A3: -0.37 inch to +0.40 inch in 0.01 inch increments, 0 inch*
B4: -0.40 inch to +0.40 inch in 0.01 inch increments, 0 inch*
LGL: -0.40 inch to +0.40 inch in 0.01 inch increments, 0 inch*
A4R: -0.40 inch to +0.40 inch in 0.01 inch increments, 0 inch*
LTRR: -0.40 inch to +0.28 inch in 0.01 inch increments, 0 inch*
X, Y: -5/16" to +5/16" (-8 mm to +8 mm in 1 mm increments); 0 mm*
Press [Start]
Press [Start]
T-1-23
Intermediate item
-2.0 mm to +2.0 mm (0 mm*) in 0.25 mm increments
2-3/4" to 5-7/8" (70 mm to 150 mm), 4-3/4"* (120 mm)
11" x 17": -0.13 inch to +0.40 inch in 0.01 inch increments, 0 inch*
A3: -0.37 inch to +0.40 inch in 0.01 inch increments, 0 inch*
B4: -0.40 inch to +0.40 inch in 0.01 inch increments, 0 inch*
LGL: -0.40 inch to +0.40 inch in 0.01 inch increments, 0 inch*
A4R: -0.40 inch to +0.40 inch in 0.01 inch increments, 0 inch*
LTRR: -0.40 inch to +0.28 inch in 0.01 inch increments, 0 inch*
X, Y: -5/16" to +5/16" (-8 mm to +8 mm in 1 mm increments); 0 mm*
Press [Start]
T-1-24
Intermediate item
Send
Send
Network
Printer
0008-8649
0006-9457