Copy Settings - Canon ImageRunner iR8500 Series Service Manual

Chapter 1
Main item: Spool Settings
Intermediate item
Use Spooler
*: Factory default.
Main item: Startup Time Settings
Intermediate item
Startup Time Settings 0 to 300 seconds (60*)
*: Factory default.
Main item: Ethernet Driver Settings
Intermediate item
Auto Detect
Communication Mode Half Duplex*/Full Duplex
Ethernet Type
MAC Address
*: Factory default.
Main item: E-Mail/I-Fax Settings
Intermediate item
SMTP Receipt
POP
On*/Off
E-mail Address
POP Server
POP Address
POP Password
POP Interval
Authent./Encryption
*: Factory default.

1.2.4.13 Copy Settings

iR105i/iR105+ / iR9070
Main item
Screen Display Setting
Paper Select Key Size for Express Copy Screen Large* (Stack Bypass/Stack Bypass Settings/Paper Drawer 1/
Standard Key 1, 2 Settings for Regular Copy
Screen
Standard Key Settings for Express Copy Screen The number of the displayed Standard Keys:
1-42
T-1-35
On/Off*
T-1-36
T-1-37
On*/Off
10 Base-T*/100 Base-TX
Display only
T-1-38
On*/Off
On*/Off
Server name or IP address (48 Characters maximum)
64 Characters maximum
Server name or IP address (48 Characters maximum)
32 Characters maximum
32 Characters maximum
0 to 99 (If the interval is set to '0', the incoming e-mail is not checked automatically.)
POP Authentication: Standard*/APOP/POP AUTH/APOP/POP AUTH
POP Authentication before Sending: On/Off*
SMTP Authentication (SMTP AUTH): On/Off*
User: User name for SMTP authentication (64 Characters maximum)
Password: Password for SMTP authentication (32 Characters maximum)
Allow SSL (POP): On/Off*
Allow SSL (SMTP Send): On/Off*
Allow SSL (SMTP Receive): SSL/On/Off*
T-1-39
Intermediate item
Regular Copy Only/Regular and Express Copy*/Express Copy
Only
Regular Copy Screen Priority: On*/Off
Paper Drawer 2/Paper
Drawer 3/Paper Drawer 4/Paper Drawer 5), Small: Max 4 paper
sources
All modes (No settings*)
Up to 5 Set Keys*/Up to 10 Set Keys
0006-9440