Counters - Canon imageRUNNER ADVANCE C3325i Service Manual

S. Counters
The imageRUNNER ADVANCE C3300 Series machines use soft counters to
track their functional copy use. The control panel displays up to eight
counters on the Counter Status Check screen (when the Counter Check key
on the control panel is pressed). By default, the imageRUNNER ADVANCE
C3300 Series machines display 6 out of 8 counters on the Counter Status
Check screen.
The imageRUNNER ADVANCE C3300 Series machines also have a Toner
Bottle Counter that counts up after the machines recognize that a new toner
bottle has been inserted. There is also a Video Count Frequency Distribution
Counter that determines a customer's image duty trend. These counters are
installed to provide support for billing customers who order and consume a lot
of toner. Toner units shipped can be compared against toner bottles actually
installed in the machine.
The table below indicates the default counter configurations of the
imageRUNNER ADVANCE C3300 Series machines displayed on the Counter
Status Check screen. For more information on the soft counter
configurations, see the imageRUNNER ADVANCE C3300 Series Service
Manual. Specifically, refer to the Service Mode section of the Service Manual
that covers the setting under COPIER > OPTION > USER.
Table 23 – Soft Counter Configuration
Counter
1
2
3
4
5
6
7
8
The displayed counters can be changed, enabled, or disabled in the Service
Mode, except for Counter 1. Counter 1 cannot be changed under any
circumstances.
48 Refers to large size paper (when the paper length exceeds 14" (364 mm) in the paper feed direction).
49 Refers to small size paper (when the paper length is 14" (364 mm) or shorter in the paper feed direction).
imageRUNNER ADVANCE C3300 Series Service Guide
imageRUNNER ADVANCE C3300 Series Service Guide
Description
101: Total 1
108: Total (Black 1)
229: Copy (Full Color + Single Color/Large
230: Copy (Full Color + Single Color/Small
321: Print (Full Color + Single Color/Large
322: Print (Full Color + Single Color/Small
Not displayed
Not displayed
Default
Default Switch
Display
On
On
48
) On
49
) On
Can be changed via
Service Mode setting
48
) On
to any available
49 counter.
) On
Off
Off
Fixed
May 2015
Page 62