Fan Module Led On An Acx5000 Router - Juniper ACX5048 Hardware Manual

SEE ALSO
Prevention of Electrostatic Discharge Damage | 196
Installing a Fan Module in an ACX5000 Router | 134
Removing a Fan Module from an ACX5000 Router | 133

Fan Module LED on an ACX5000 Router

Figure 17 on page 64 shows the location of the LED next to the fan module.
Figure 17: Fan Module LED in an ACX5000 Router
1 Fan LED
—
Table 15 on page 64 describes the function of the fan tray LED.
Table 15: Fan Tray LED in an ACX5000 Router
Name
Fan
SEE ALSO
Color State
Green On steadily
Amber Blinking
Description
The fan module is operating normally. The
system has verified that the module is
engaged, that the airflow is in the correct
direction, and that the fan is operating
correctly.
An error has been detected in the fan
module. Replace the fan module as soon
as possible. Either the fan has failed or it
is seated incorrectly. To maintain proper
airflow through the chassis, leave the fan
module installed in the chassis until you
are ready to replace it.
64