Show Ipv6 Mroute Static - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Switch# show ipv6 mroute forwarding-cache
(2000:60:1:1::10, ff0e::1:1:1) VLAN0060
Outgoing interface list: 1/0/1, T2
(2000:60:1:1::10, ff0e::1:1:2) VLAN0060
Outgoing interface list: 1/0/1, 2/0/2
Total entries: 2
Switch#

52-6 show ipv6 mroute static

This command is used to display IPv6 static multicast routes.
show ipv6 mroute static
Parameters
None.
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display IPv6 static configured multicast routes.
Example
This example shows how to o display IPv6 static configured multicast routes.
Switch# show ipv6 mroute static
Mroute: 2000:: /64
RPF nbr: 2000::1001:0101
Mroute: 2001:: /64
RPF nbr: 2000::1001:0101, interface: vlan10
Mroute: 2002:: /64
Interface: null
Total Entries: 3
Switch#
Display Parameters
RPF nbr The IPv6 address of the upstream router to the RP or source.
615