D-Link DXS-3600 Series Reference Manual page 513

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
This command is used to enable the sending of SNMP MAC notification traps. Use the no form of the
command to disable the sending of SNMP MAC notification traps.
snmp-server enable traps mac-notification change
no snmp-server enable traps mac-notification change
Parameters
None.
Default
By default, this option is disabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command to enable the sending of SNMP MAC notification traps.
Example
This example shows how to enable the sending of SNMP MAC notification traps.
Switch# configure terminal
Switch(config)# snmp-server enable traps mac-notification change
Switch(config)#
40-14 snmp trap mac-notification change
This command is used to enable the MAC address change notification on a specific interface. Use the no
form of the command to return to the default setting.
snmp trap mac-notification change {added | removed}
no snmp trap mac-notification change{added | removed}
Parameters
added
removed
Default
The traps for both address addition and address removal are disabled.
Command Mode
Interface Configuration Mode.
Command Default Level
Specifies to enable the MAC change notification when a MAC address
is added on the interface.
Specifies to enable the MAC change notification when a MAC address
is removed from the interface.
513