D-Link DXS-3600 Series Reference Manual page 483

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Command Default Level
Level: 12.
Usage Guideline
Multiple ERP instances can be associated with the same profile. Generally, the instances associated with
the same G.8032 profile protect the same set of VLANs or the set of VLANs protected by one instance is
a subset of LANs protected by another instance. To change the profile association, deactivate the ERP
instance first.
Example
This example shows how to configure the guard timer to 700 milliseconds, hold-off timer to 1, WTR timer
to 1 minutes for profile "campus", and then associate instance 1 and 2 with the profile.
Switch# configure terminal
Switch(config)# ethernet ring g8032 profile campus
Switch(config-g8032–ring-profile)# timer guard 700 hold-off 1 wtr 1
Switch(config-g8032–ring-profile)#
Switch(config)# ethernet ring g8032 ring1
Switch(config-erp)# port0 interface eth3/0/1
Switch(config-erp)# port1 interface eth3/0/2
Switch(config-erp)# instance 1
Switch(config-erp-instance)# profile campus
Switch(config-erp-instance)#
Switch(config)# ethernet ring g8032 ring2
Switch(config)# ethernet ring g8032 ring1
Switch(config-erp)# sub-ring ring2
Switch(config)# ethernet ring g8032 ring2
Switch(config-erp)# port0 interface eth3/0/3
Switch(config-erp)# port1 none
Switch(config-erp)# instance 2
Switch(config-erp-instance)# profile campus
Switch(config-erp-instance)#
37-11 port0
This command is used to specify the first ring port of a physical ring. To remove the first ring port setting,
use the no form of this command.
port0 interface INTERFACE-ID
no port0
Parameters
INTERFACE-ID
Default
None.
Command Mode
ERP Configuration Mode.
Specifies the interface ID of the configured ring port. It can be physical
port or port-channel interface.
483