D-Link DXS-3600 Series Reference Manual page 667

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
LLDP-DCBX capabilities
Switch#
This example shows how to display local information of port 1 in brief mode.
Switch# show lldp local interface ethernet 1 brief
Port ID: eth1/0/1
-----------------------------------------------------------------------------
Port ID Subtype
Port ID
Port Description
Switch#
58-24 show lldp management-address
This command is used to display the management address information.
show lldp management-address [IP-ADDRESS | IPV6-ADDRESS]
Parameters
IP-ADDRESS
IPV6-ADDRESS
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display the management address information.
Example
This example shows how to display all management address information.
Switch# show lldp management-address
Address 1 : (default)
------------------------------------------------
Subtype
Address
IF Type
: (See Detail)
: MAC Address
: 00-01-02-03-05-00
: D-Link DXS-3600-16S 2.00.012
Port 1 on Unit 1
(Optional) Specifies to display the LLDP management information for a
specific IPv4 address.
(Optional) Specifies to display the LLDP management information for a
specific IPv6 address.
: IPv4
: 10.90.90.90
: IfIndex
667