D-Link DXS-3600 Series Reference Manual page 776

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
show mpls ldp session [peer IP-ADDRESS] [detail | statistic]
Parameters
peer IP-ADDRESS
detail
statistic
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display all LDP sessions.
Example
This example shows how to display all LDP session information.
Switch# show mpls ldp session
Peer
----------
10.1.1.2:0
20.1.1.2:0
Total Entries : 2
Switch#
This example shows how to display LDP session detailed information of peer 10.1.1.2.
Switch# show mpls ldp session peer 10.1.1.2 detail
Peer
Status
Role
Keep Alive(Sec)
Remain Time(Sec)
Create Time
Distribution Method : DU
Loop Detection
Max PDU Length
Address List
Total Entries: 1
Specifies the IP address of the peer LSR ID. If not specified, all
sessions will be displayed.
Specifies to display detailed information.
Specifies to display session statistics.
Status Role
------------ --------
OPERATIONAL Active
OPERATIONAL Passive
: 10.1.1.2:0
: OPERATIONAL
: Active
: 40
: 20
: 2013-12-1 14:10:30
: Enabled
: 1500
: 10.1.1.2
172.18.1.1
Keep Alive Distribution Method
----------- ------------------
40(Sec) DU
40(Sec) DU
776