D-Link DXS-3600 Series Reference Manual page 614

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
vlan20
Switch#
Display Parameters
Flags
Timers: Uptime/Expires
Incoming interface
RPF nbr
Outgoing interface
52-5 show ipv6 mroute forwarding-cache
This command is used to display the content of the IPv6 multicast routing forwarding cache database.
show ipv6 mroute forwarding-cache [group-addr GROUP-ADDRESS [source-addr SOURCE-
ADDRESS]]
Parameters
group-addr GROUP-
ADDRESS
source-addr SOURCE-
ADDRESS
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display the content of the IPv6 multicast forwarding cache information. IPv6
multicast forwarding cache is a summary table from the IPv6 multicast route table, MLD snooping group
member table, and multicast router ports.
Example
This example shows how to display the IPv6 multicast routing forwarding cache.
Provides information about the entry.
S – Sparse. Entry is operating in sparse mode.
"Uptime" indicates per interface how long (in day, hours, minutes, and
seconds) the entry has been in the IPv6 multicast routing table.
"Expires" indicates per interface how long (in day, hours, minutes, and
seconds) until the entry will be removed from the IPv6 multicast routing
table
Expected interface for a multicast packet from the source. If the packet
is not received on this interface, it is discarded.
The IPv6 address of the upstream router to the RP or source.
Interfaces through which packets will be forwarded. For (S,G) entries,
this list will not include the interfaces inherited from the (*,G) entry.
(Optional) Specifies the group IPv6 address.
Specifies the multicast source IPv6 address.
614