D-Link DXS-3600 Series Reference Manual page 616

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Mroute
Interface
52-7 show ipv6 rpf
This command is used to check Reverse Path Forwarding (RPF) information for a given unicast host
address.
show ipv6 rpf IPV6-ADDRESS
Parameters
IPV6-ADDRESS
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays how IPv6 multicast routing performs RPF. Because the router can find RPF
information from multiple routing tables (for example, Unicast Routing Information Base, or static mroutes),
this command displays the source from which the information is retrieved.
Example
This example shows how to display RPF information for the unicast host with the IPv6 address of
2001::1:1:3.
Switch# show ipv6 rpf 2001::1:1:3
RPF information for 2001::1:1:3
RPF interface: vlan11
RPF neighbor: FE80::40:1:3
RPF route/mask: 2001::/64
RPF type: unicast
Metric: 2
Switch#
This example shows how to display RPF information for the unicast host with the IPv6 address of
2000::1000:3.
Switch# show ipv6 rpf 2000::1000:3
RPF information for 2000::1000:3
RPF neighbor: 2000::1001:0101
Indicates the IPv6 prefix of the remote network.
Specifies the interface of the next router (RPF neighbor) to the remote
network.
Specifies the IPv6 address to display.
616