Show Mpls Ldp Discovery - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display all LDP label binding information.
Example
This example shows how to display all LDP label binding information.
Switch# show mpls ldp bindings
FEC: 3.3.3.3/32
State
In-lable
Upstream
Out-lable : None
Downstream: None
FEC: 1.1.1.1/32
State
In-lable
Upstream
Out-lable : 172
Downstream: 2.2.2.2
Total Entries: 2
Switch#
67-33

show mpls ldp discovery

This command is used to display LDP peer information.
show mpls ldp discovery
Parameters
None.
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
: Established
: 0
: 2.2.2.2
: Established
: None
: None
770