D-Link DXS-3600 Series Reference Manual page 584

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
vlan121, Forwarding 0DT00H01M23S/0DT00H03M34S
vlan125, Forwarding 0DT00H01M23S/null
(20.1.1.1, 228.0.0.20), 0DT05H29M15S/0DT00H02M59S
Incoming interface: vlan10, RPF neighbor: 10.3.4.5
Outgoing interface list: NULL
Total Entries: 2
Switch#
This example shows how to display a multicast sparse mode route entry.
Switch# show ip mroute sparse
(10.10.1.52, 224.0.1.3), 0DT05H29M15S/0DT00H02M59S, flags: ST
Incoming interface: vlan1, RPF neighbor: 10.3.4.5
Outgoing interface list:
vlan126, Forwarding 0DT00H00M03S/0DT00H04M07S
vlan127, Forwarding 0DT00H00M03S/0DT00H04M11S
Total Entries: 1
Switch#
This example shows how to display the static configured multicast route.
Switch# show ip mroute static
Mroute: 192.168.6.0/24, RPF neighbor: 10.1.1.1
Mroute: 192.168.7.0/24, RPF neighbor: 10.1.1.1
Mroute: 192.168.8.0/24, RPF neighbor: NULL
Total Entries: 3
Switch#
47-7 show ip mroute forwarding-cache
This command is used to display the content of the IP multicast routing forwarding cache database
show ip mroute forwarding-cache [group-addr GROUP-ADDRESS [source-addr SOURCE-
ADDRESS]]
Parameters
group-addr GROUP-
ADDRESS
source-addr SOURCE-
ADDRESS
(Optional) Specifies the group IP address.
(Optional) Specifies the multicast source IP address.
584
flags: D