D-Link DXS-3600 Series Reference Manual page 621

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Parameters
None.
Default
IPv6 snooping is permitting station moves.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
When station move is permitted, the dynamic snooping binding entry with same VLAN ID and MAC
address on the specific port can move to another port if it detects the following conditions:
•
A DHCPv6 snooping binding entry starts a new DHCP process on a new interface.
•
An ND snooping binding entry starts a new DAD process on a new interface.
Example
This example shows how to deny the station move function.
Switch# configure terminal
Switch(config)# ipv6 snooping station-move deny
Switch(config)#
53-6 show ipv6 snooping policy
This command is used to display DHCPv6 guard information.
show ipv6 snooping policy [POLICY-NAME]
Parameters
POLICY-NAME
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
If the policy name is specified, only the specified policy information is displayed.
If the policy name is not specified, information is displayed for all policies.
Example
This example shows how to display DHCPv6 guard information.
Switch# show ipv6 snooping policy
(Optional) Specifies the DHCPv6 guard policy name.
621