Show Ip Arp Inspection Log - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Rate (pps)
Burst Interval
33-13

show ip arp inspection log

This command is used to display the ARP inspection log buffer.
show ip arp inspection log
Parameters
None.
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display the content of the inspection log buffer.
Example
This example shows how to display the inspection log-buffer.
Switch# show ip arp inspection log
Total log buffer size: 64
Interface
---------- --------
eth1/0/1
eth1/0/2
eth1/0/3
Total Entries: 3
Switch#
Display Parameters
Interface
VLAN
Sender IP
The upper limit on the number of incoming packets processed per
second.
The consecutive interval in seconds over which the interface is
monitored for the high rate of the ARP packets.
VLAN Sender IP
------------- -----------------
100 10.20.1.1
100 10.5.10.16
100 10.58.2.30
The name of interface that logging occurred.
The VLAN that logging occurred.
The logging ARP's sender IP address.
Sender MAC
--------------------------
00-20-30-40-50-60
55-66-20-30-40-50
10-22-33-44-50-60
450
Occurrence
1 (2013-12-28 23:08:66)
2 (2013-12-02 00:11:54)
1 (2013-12-30 12:01:38)