D-Link DXS-3600 Series Reference Manual page 373

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display DHCP snooping database statistics.
Example
This example shows how to display DHCP snooping database statistics.
Switch# show ip dhcp snooping database
URL: tftp://10.0.0.2/store/dhcp-snp-bind
Write Delay Time: 300 seconds
Last ignored bindings counters :
Binding collisions :
Invalid interfaces :
Parse failures
Switch#
Display Parameters
Binding Collisions
Expired leases
Invalid interfaces
Parse failures
Checksum errors
Unsupported vlans
22-17 based-on hardware-address
This command is used to add or delete an entry of the DHCP server screen profile.
based-on hardware-address CLIENT-HARDWARE-ADDRESS
no based-on hardware-address CLIENT-HARDWARE-ADDRESS
Parameters
0 Expired
0 Unsupported vlans :
: 0 Checksum errors
The number of entries that created collisions with exiting entries in
DHCP snooping database.
The number of entries that expired in the DHCP snooping database.
The number of interfaces that received the DHCP message but DHCP
snooping is not performed.
The number of illegal DHCP packets.
The number of calculated checksum values that is not equal to the
stored checksum.
The number of the entries of which the VLAN is disabled.
373
lease : 0
0
: 0