D-Link DXS-3600 Series Reference Manual page 426

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
None.
Default
By default, this option is disabled.
Command Mode
Interface Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
This command is used to configure the Ethernet OAM unidirectional link detection action on the specified
port.
Example
This example shows how to configure interface 1/0/1's OAM DULD mode to shutdown.
Switch# configure terminal
Switch(config)# interface eth1/0/1
Switch(config-if)# duld action shutdown
Switch(config-if)#
30-3 duld discovery-time
This command is used to configure Ethernet OAM unidirectional link detection discovery time.
duld discovery-time SECONDS
no duld discovery-time
Parameters
SECONDS
Default
By default, this value is 5 seconds.
Command Mode
Interface Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
If the OAM discovery does not successfully negotiate before discovery time expired, OAM unidirectional
link detection will start.
Example
This example shows how to configure the DULD discovery time to 7 seconds on interface 1/0/1.
Switch# configure terminal
Switch(config)# interface eth1/0/1
Switch(config-if)# duld discovery-time 7
Specifies the discovery time. The valid range is 5 to 65535.
426