Ip Igmp Snooping Mrouter - D-Link DXS-3600 Series Reference Manual

Dxs-3600 series layer 2/3 managed 10gigabit ethernet switch
Hide thumbs Also See for DXS-3600 Series:
Table of Contents

Advertisement

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Switch(config)# interface eth4/0/24
Switch(config-if)# ip igmp snooping limit 80 except igmp_filter vlan 1000
Switch(config-if)#
This example shows how to set the limit number of IGMP snooping groups with a configuration limit from
an ACL that port-channel 4 (which is an access port) with the VLAN ID of 100 can join to.
Switch# configure terminal
Switch(config)# interface port-channel4
Switch(config-if)# ip igmp snooping limit 55 except igmp_filter
Switch(config-if)#
This example shows how to reset the limit number to the default of IGMP snooping groups that port-
channel 4 (which is a trunk port) with the VLAN ID of 1000 can join to.
Switch# configure terminal
Switch(config)# interface eth4/0/38
Switch(config-if)# no ip igmp snooping limit vlan 1000
Switch(config-if)#
This example shows how to reset the limit number to the default of IGMP snooping groups that port-
channel 4 (which is a trunk port) can join.
Switch# configure terminal
Switch(config)# interface port-channel4
Switch(config-if)# no ip igmp anooping limit vlan 1
Switch(config-if)#

44-8 ip igmp snooping mrouter

This command is used to configure the specified interface(s) as the multicast router ports or as forbidden
to be multicast router ports on the switch. Use the no form of this command to remove the interface(s)
from router ports or forbidden multicast router ports.
ip igmp snooping mrouter {interface INTERFACE-ID [,|-] | forbidden interface INTERFACE-ID [,|-]}
no ip igmp snooping mrouter {interface INTERFACE-ID [,|-] | forbidden interface INTERFACE-ID
[,|-]}
Parameters
interface
forbidden interface
INTERFACE-ID
,
-
Default
Specifies a static multicast router port.
Specifies a port that cannot be multicast router port.
(Optional) Specifies an interface or an interface list. The interface can
be a physical interface or a port-channel.
(Optional) Specifies a series of interfaces, or a separate a range of
interfaces from a previous range. No space is allowed before and after
the comma.
(Optional) Specifies a range of interfaces. No space is allowed before
and after the hyphen.
538

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dxs-3600-32s

Table of Contents