D-Link DXS-3600 Series Reference Manual page 387

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
This command is used to configure the sub-type of the remote ID. Use the no form of this command to
revert to the default settings.
ipv6 dhcp relay remote-id format SUB-TYPE-NAME
no ipv6 dhcp relay remote-id format
Parameters
SUB-TYPE-NAME
Default
None.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
The command is used to configure the sub-type of the Remote ID option.
Example
This example shows how to configure the sub-type of the remote ID to "cid-with-user-define".
Switch# configure terminal
Switch(config)# ipv6 dhcp relay remote-id format cid-with-user-define
Switch(config)#
25-3 ipv6 dhcp relay remote-id option
This command is used to enable the insertion of the relay agent remote ID Option 37 during the relay of
DHCP for IPv6 request packets. Use the no form of the command to disable the insert function.
ipv6 dhcp relay remote-id option
no ipv6 dhcp relay remote-id option
Parameters
None.
Default
By default, this option is disabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Specifies the string that identifies the sub-type for the remote ID to be
configured.
387