DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Parameters
med
Default
The LLDP and LLDP-MED trap states are disabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Use the snmp-server enable traps lldp command to enable the sending of LLDP notifications.
Use the snmp-server enable traps lldp med command to enable the sending of LLDP-MED notifications.
Example
This example shows how to enable the LLDP MED trap.
Switch# configure terminal
Switch(config)# snmp-server enable traps lldp med
Switch(config)#
58-19
lldp notification enable
This command is used to enable the sending of LLDP and LLDP-MED notifications for the interface. Use
the no form of the command to disable the sending.
lldp [med] notification enable
no lldp [med] notification enable
Parameters
med
Default
The LLDP and LLDP-MED notification states are disabled.
Command Mode
Interface Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Use the lldp notification enable command to enable the sending of LLDP notifications.
Use the lldp med notification enable command to enable the sending of LLDP-MED notifications.
Example
This example shows how to enable the sending of LLDP MED notifications for eth2/0/1.
(Optional) Specifies to enable the LLDP-MED trap state.
(Optional) Specifies to enable the LLDP-MED notification state.
659