Clear Ipv6 Dhcp Binding - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Switch(dhcpv6-config)# ipv6 dhcp server pool1
Switch(dhcpv6-config)#
This example shows how to configure a static binding address entry in an IPv6 DHCP pool named "pool2"
with IAID option and associates the IPv6 DHCP pool with VLAN 200.
Switch# configure terminal
Switch(config)# ipv6 dhcp pool pool2
Switch(dhcpv6-config)# address-assignment 2001:AAB8::2:2 00030001050611223344 iaid
0x123
Switch(dhcpv6-config)# exit
Switch(config)# interface vlan200
Switch(config-if)# ipv6 dhcp server pool2
Switch(config-if)#

26-3 clear ipv6 dhcp binding

This command is used to delete the DHCPv6 server binding entries.
clear ipv6 dhcp binding {all | IPV6-PREFIX}
Parameters
all
IPV6-PREFIX
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 12.
Usage Guideline
Use the command to clear the DHCPv6 server binding entries. If an IPv6 prefix is specified for the
command, the binding entry corresponding to the specified client is cleared. Otherwise, all binding entries
will be cleared. The IPv6 prefix being freed will be returned to the pool it is originally allocated.
Example
This example shows how to clear all the binding entries in the DHCPv6 server binding table.
Switch# clear ipv6 dhcp binding all
Switch#
26-4 domain-name
This command is used to configure a domain name to be assigned to the requesting DHCPv6 client. Use
the no form of this command to remove the domain name specification.
Specifies to clear all binding entries.
Specifies the binding entry by prefix to be cleared.
394