D-Link DXS-3600 Series Reference Manual page 586

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Usage Guideline
This command displays how the IP multicast routing performs RPF. Because the router can find RPF
information from multiple routing tables (For example, the Unicast Routing Information Base, or static
mroutes), the show ip rpf command displays the source from which the information is retrieved.
Example
This example shows how to display RPF information for the unicast host with the IP address of 20.1.1.3.
Switch# show ip rpf 20.1.1.3
RPF information for 20.1.1.3
RPF interface: vlan11
RPF type: unicast
Metric: 10
Switch#
This example shows how to display RPF information for the unicast host with the IP address of 1.3.3.3.
Switch# show ip rpf 1.3.3.3
RPF information for 1.3.3.3
RPF neighbor: 2.1.5.1
RPF type: static
Switch#
This example shows how to display RPF information for the unicast host with the IP address of 3.2.2.2.
Switch# show ip rpf 3.2.2.2
RPF information for 3.2.2.2
RPF interface: NULL
RPF type: static
Switch#
Display Parameters
RPF neighbor
RPF type
Metric
47-9 show ip multicast-statistics
This command is used to display the received and sent multicast packet statistics counters.
The IP address of the upstream router to source. This field is optional if
the neighbor does not exist.
unicast – RPF information is obtained from the unicast routing table.
static – RPF information is obtained from the static multicast route.
Indicates the unicast routing metric. This field is optional if the metric
does not exist.
586