Interface Commands - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide

45. Interface Commands

45-1 clear counters
This command is used to clear counters for a physical port interface.
clear counters {all | interface INTERFACE-ID [,|-]}
Parameters
all
INTERFACE-ID
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command to clear counters for a physical port interface.
Example
This example shows how to clear the counters of interface eth1/0/1.
Switch# clear counters interface eth1/0/1
Switch#
45-2 description
This command is used to add a description to an interface.
description STRING
no description
Parameters
STRING
Default
None.
Command Mode
Interface Configuration Mode.
Specifies to clear counters for all interfaces.
Specifies the interface ID to clear the counter.
Specifies a description for an interface with a maximum of 64
characters.
553