D-Link DXS-3600 Series Reference Manual page 474

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Window
Threshold
Accumulated errors
0 Errored Frame Period records
0 Errored Frame Second records
Switch#
Display Parameters
Event index
Time stamp
Error frame
Window
Threshold
Accumulated errors
36-16 clear ethernet oam event-log
This command is used to clear the event log of the Ethernet OAM function.
clear ethernet oam event-log {all | interface INTERFACE-ID [, | -]}
Parameters
all
interface INTERFACE-ID
,
-
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 12.
Usage Guideline
This command is used to clear a port's Ethernet OAM event log.
: 10 (decisecond)
: 3
: 10
When event was generated each event had the index.
The time reference when the event was generated.
The number of detected error frames in the period.
The duration of the period in terms of 100ms intervals.
The number of detected error frames in the period is required to be
equal to or greater than in order for the event to be generated.
The sum of error records that have been detected in this event since
the OAM sub-layer was reset.
Specifies to clear the event log of all interfaces.
Specifies the interface ID to clear. The allowed interfaces only include
physical ports.
(Optional) Specifies a series of interfaces, or separate a range of
interfaces from a previous range. No spaces before and after the
comma.
(Optional) Specifies a range of interfaces. No spaces before and after
the hyphen.
474