D-Link DXS-3600 Series Reference Manual page 471

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
36-13 show ethernet oam statistics
This command is used to display the statistics of the Ethernet OAM function.
show ethernet oam statistics [interface INTERFACE-ID [, | -]]
Parameters
interface INTERFACE-ID
,
-
Default
None.
Command Mode
EXEC Mode.
Command Default Level
Level: 1.
Usage Guideline
The command is used to display port Ethernet OAM statistics.
Example
This example shows how to display the Ethernet OAM statistics of interface eth1/0/1.
Switch# show ethernet oam statistics interface eth1/0/1
eth1/0/1
Information OAMPDU TX
Information OAMPDU RX
Unique event notification OAMPDU TX
Unique event notification OAMPDU RX
Duplicate event notification OAMPDU TX
Duplicate event notification OAMPDU RX
Loopback control OAMPDU TX
Loopback control OAMPDU RX
Variable request OAMPDU TX
Variable request OAMPDU RX
Variable response OAMPDU TX
Variable response OAMPDU RX
Organization specific OAMPDU TX
Organization specific OAMPDU RX
Unsupported OAMPDU TX
Unsupported OAMPDU RX
Frame lost due to OAM
Specifies the interface ID to display. The allowed interfaces only
include physical ports.
(Optional) Specifies a series of interfaces, or separate a range of
interfaces from a previous range. No spaces before and after the
comma.
(Optional) Specifies a range of interfaces. No spaces before and after
the hyphen.
471
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0