D-Link DXS-3600 Series Reference Manual page 487

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Command Default Level
Level: 1.
Usage Guideline
Use the show ethernet ring g8032 brief command to display brief information of ERP instances.
Use the show ethernet ring g8032 status command to display status information of ERP instances.
Example
This example shows how to display detailed information of ERP instances.
Switch# show ethernet ring g8032 status
Ethernet ring "Major-Ring",instance 1,
------------------------------------
Description: campus instance 1
MEL: 1
Connect sub-ring: "Sub-Ring"
R-APS Channel: 2, Protected VLAN: 10-20
Profile: Campus
Guard timer: 500 milliseconds
Hold-Off timer: 0 milliseconds
WTR timer: 5 minutes
Non-revertive
Instance State: Idle
Admin RPL ：None
Operational RPL ：None
Admin Port0: eth3/0/1
Operational Port0: eth3/0/1,
Port0 State: Blocking
Admin Port1: eth3/0/2
Operational Port1: eth3/0/2
Port1 State:Forwarding
Admin RPL Port : Port0
Operational RPL Port : Port0
Ethernet ring "Sub-Ring", instance 2
------------------------------------
Description: campus instance 2
MEL: 2
Connect morjor ring: "Major-Ring"
R-APS Channel: 2, Protected VLAN: 10-20
profile: Campus
Guard timer: 500 milliseconds
Hold-Off timer: 0 milliseconds
WTR timer: 5 minutes
Non-revertive
No TC propagation
Instance State: Deactivated
RPL ：-
Admin
Operational RPL ：-
Admin Port0: eth3/0/3
Operational Port0: eth3/0/3
Port0 State:-
487