D-Link DXS-3600 Series Reference Manual page 580

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
This command is used to configure the IP multicast forwarding lookup mode.
Example
This example shows how to configure the IP multicast forwarding lookup mode to MAC.
Switch# configure terminal
Switch(config)# ip multicast table-lookup-mode mac
Switch(config)#
47-3 ip multicast-routing
This command is used to enable IP multicast routing. Use the no form of this command to disable IP
multicast routing.
ip multicast-routing
no ip multicast-routing
Parameters
None.
Default
By default, this option is disabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
When IP multicast routing is disabled, the system will stop routing multicast packets even though the
multicast routing protocol is enabled.
Example
This example shows how to enable IP multicast routing.
Switch# configure terminal
Switch(config)# ip multicast-routing
Switch(config)#
47-4 ip mroute
This command is used to create a static multicast route (mroute). Use the no form of this command to
delete the route.
580