Show Interfaces Counters - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide

45-7 show interfaces counters

This command is used to display counters on specified interfaces.
show interfaces [INTERFACE-ID [,|-]] counters [errors]
Parameters
errors
INTERFACE-ID
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command allows the user to display switch port statistics counters.
Example
This example shows how to display switch port RX counters on ports 1 to 8.
Switch#show interfaces ethernet 1/0/1-8 counters
Port
------------- ---------------------- ----------------------
eth1/0/1
eth1/0/2
eth1/0/3
eth1/0/4
eth1/0/5
eth1/0/6
eth1/0/7
eth1/0/8
Port
(Optional) Specifies to display the error counters.
(Optional) Specifies that the interface can be a physical port or VLAN
interfaces. If no interface is specified, the counters on all interfaces will
be displayed.
InOctets /
InUcastPkts
1834520
9234
0
0
0
0
0
0
0
0
0
0
0
0
0
0
OutOctets /
InMcastPkts /
InBcastPkts
629
338
0
0
0
0
0
0
0
0
0
0
0
0
0
0
OutMcastPkts /
560