Ip-Mac-Port Binding (Impb) Commands - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide

51. IP-MAC-Port Binding (IMPB) Commands

51-1 clear ip ip-mac-port-binding violation
This command is used to clear IP-MAC-Port Binding (IMPB) blocked entries.
clear ip ip-mac-port-binding violation {all | interface INTERFACE-ID | MAC-ADDRESS}
Parameters
all
interface INTERFACE-ID
MAC-ADDRESS
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 12.
Usage Guideline
Use the command to delete the IMPB violation entry from the filtering database.
Example
This example shows how to clear the entry blocked on interface eth1/0/4.
Switch# clear ip ip-mac-port-binding violation interface eth1/0/4
Switch#
51-2 ip ip-mac-port-binding
This command is used to enable the IMPB access control for port interfaces. Use the no form of the
command to disable the IMPB access control function.
ip ip-mac-port-binding [MODE]
no ip ip-mac-port-binding
Parameters
MODE
Specifies to clear all of the violation entries.
Specifies to clear the violation entries created by the specified
interface.
Specifies to clear the violation entries of the specified MAC address.
Specifies the IMPB access control mode.
strict-mode: Specifies to perform strict mode access control.
loose-mode: Specifies to perform loose mode access control.
If the mode option is not specified, the strict-mode is used.
607