D-Link DXS-3600 Series Reference Manual page 617

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
RPF route/mask: 2000::1000:0/64
RPF type: static
Switch#
This example shows how to display RPF information for the unicast host with the IPv6 address of
2000::3000:301.
Switch# show ipv6 rpf 2000::3000:301
RPF information for 2000::3000:301
RPF interface: vlan10
RPF neighbor: FE80::200:FF:FE26:666C
RPF route/mask: 3002::/64
RPF Type: static
Switch#
Display Parameters
RPF neighbor
RPF type
Metric
The IPv6 address of the upstream router to the RP or source. This field
is optional if the neighbor does not exist.
unicast – RPF information is obtained from the unicast routing table.
static – RPF information is obtained from the static multicast route.
Indicates the unicast routing metric. This field is optional if the metric
does not exist.
617