DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Command Mode
Interface Configuration Mode.
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
For a VLAN to operate with MLD snooping, both the global state and per interface state must be enabled.
On a VLAN, the setting of IGMP snooping and MLD snooping are independent. That is, IGMP snooping
and MLD snooping can be simultaneously enabled on the same VLAN.
Example
This example shows how to disable MLD snooping operation on all VLANs.
Switch# configure terminal
Switch(config)# no ipv6 mld snooping
Switch(config)#
This example shows how to enable MLD snooping operation on VLANs that are MLD snooping enabled.
Switch# configure terminal
Switch(config)# ipv6 mld snooping
Switch(config)#
This example shows how to enable MLD snooping on VLAN 1.
Switch# configure terminal
Switch(config)# vlan 1
Switch(config-vlan)# ipv6 mld snooping
Switch(config-vlan)#
63-3 ipv6 mld snooping fast-leave
This command is used to configure MLD snooping fast-leave on the interface. Use the no form of the
command to disable the fast-leave or option on the specified interface.
ipv6 mld snooping fast-leave
no ipv6 mld snooping fast-leave
Parameters
None.
Default
By default, this option is disabled.
Command Mode
Interface Configuration Mode.
Command Default Level
Level: 12.
697