DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
dot3StatsSQETestErrors
dot3StatsDeferredTransmisions
dot3StatsLateCollisions
dot3StatsExcessiveCollisions
dot3StatsInternalMacTransmitErrors : 0
dot3StatsCarrierSenseErrors
dot3StatsFrameTooLongs
dot3StatsInternalMacReceiveErrors
linkChange
Switch#
45-6 show interfaces
This command is used to display the interface information.
show interfaces [INTERFACE-ID [- | ,]]
Parameters
INTERFACE-ID
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
If no interface was specified, all existing interfaces will be displayed.
Example
This example shows how to display the VLAN interface information for interface VLAN 1.
Switch# show interfaces vlan1
VLAN1 is enabled, link status is down
Interface type: VLAN
Interface description: VLAN 1 for MIS
MAC address: 08-00-01-22-00-00
Switch#
This example shows how to display the loopback interface information for interface loopback 1.
Switch# show interfaces loopback1
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
(Optional) Specifies that the interface can be a physical port, VLAN,
loopback interface, or other.
558