DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
This command is used to display multicast information of the system or any IP interface.
show ip multicast [interface [INTERFACE-ID]]
Parameters
INTERFACE-ID
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display IP multicast interface information. If the keyword interface is not specified,
the global state of IP multicast routing will be displayed. If the keyword interface is specified but the
interface ID is not specified, this command will display the information for all interfaces.
Example
This example shows how to display the global state of IP multicast routing.
Switch# show ip multicast
IP multicast-routing global state: Enabled
Table lookup mode: IP
Switch#
This example shows how to display IP multicast interface information.
Switch# show ip multicast interface
Interface Name
--------------- ------------------ ------------------
vlan1
Total Entries: 1
Switch#
47-6 show ip mroute
This command is used to display the content of the IP multicast routing table
show ip mroute [{[GROUP-ADDRESS [SOURCE-ADDRESS] | dense | sparse | dvmrp] | summary
| static}]
(Optional) Specifies the interface name to display IP multicast
information.
IP Address
Multicast Routing
192.168.20.10/24
N/A
582